您好,欢迎光临泰安双鱼塑料有限公司
客服热线:0538-8628958/8508918
Current position:Home > News Center > Industry trends
News Center
Enterprise information
Industry trends
The new film will come out of the electric......
2015/10/27 16:07:41

The new film will come out of the electric battery life without fear

  Electric vehicle with its own advantages ride the market, but it occasionally play small temper, from time to time to owners face to see. For example, riding on the halfway, suddenly broken energy, originally is to the owners to provide convenient, the result on the contrary to the owner and pushed it back home. However, the owners quickly can save worry, a new nanotube films are being developed, it can increase the capacity of the electric vehicle battery life.

According to foreign media reports, the German Fraunhof Institute of manufacturing, engineering and Automation Research Institute scientists are developing a new type of electric vehicles for the film's new material, in order to reduce battery power consumption, to ensure that electric vehicles in the car body temperature, increase battery life.

The general environment, electric vehicles can be SMOOTH OPERATOR, as in mild American California, charging pile everywhere. Can be in the low temperature environment, battery power is very easy to exhaust, the body can not start at the same time, even the car heating system can not operate. And the emergence of new type of nanotube film material, will largely solve the problem of electric vehicles in the low temperature environment. The new nanotube film will effectively maintain the body temperature, greatly reducing the electric vehicle power consumption and the extinction of the case.

The traditional internal combustion engine is provided by the engine to provide the heat needed for internal heating. But electric cars are not a lot of heat, but through the car in the laying of copper and silicon based heating pad, provided by the battery power to provide heat for electric vehicle battery is a heavy and heavy burden. Moreover, if any one of the copper wire breaks, the heating system stops working, but they still consume a lot of power.

On the contrary, the carbon nanotube film developed by the Fraunhof working group can effectively solve the heating problem of electric vehicles. These films can be pasted on the inner surface of the automobile, such as door plate and handrail, the current through the. Current flowing through the carbon nanotube, as a result of the resistance of a certain heat.

Since the film itself does not store too much heat, the heat generated will be released in time and effectively to the car compartment, to maintain internal warmth. Moreover, the new type of nano tube material can be quickly cooled down after cutting off the power supply. After the experimental data monitoring, the power consumption of the nanotube film is much lower than that of the copper wire heating system, and it is more light and thinner, and the new material has less power consumption, and the heating effect is significant. Moreover, the damage of the local nanotube film does not affect the overall work, and will not increase the power consumption. In addition, in the current heating system, the user can control the heat generated by the nanotube film, effectively control the use of electricity.

But the size of the nanotube film also need to overcome the following problems. In accordance with the morphology of the nano film, they must be in accordance with the form of a single chip connected in the form of automotive interior decoration, in order to prevent the material wrinkles. In the future, scientists hope to develop such kind of spray paint material, so that it can be more efficient and cheaper to apply to ordinary vehicles.

It is reported that this new type of nano tube film will be open to the Frankfurt international auto show this month.